Shortcut Keys and Mouse Support

Alt+click:

If you Alt+click on the "active" light of a module on the faceplate that module is made active (on) and all other modules are bypassed.

If you Alt+click on the mute ("M") button of a multiband that band is solo'ed.

If you Alt+click on a module in the preset system that module is made active and the rest inactive.

Alt+clicking on most other controls will reset them to their default value.

Wheel Mouse Notes:

If you have a wheel mouse, you can adjust most controls (I/O gain, sliders, etc.) by simply positioning the mouse cursor over the control and rolling the wheel. Hold CTRL to move in smaller increments and SHIFT to move in larger increments. If the wheel has no effect, try clicking on the plugin to make sure Ozone has the keyboard focus.

In the Paragraphic Equalizer, you can adjust the Q of a selected band or bands with the wheel.

In the Paragraphic Equalizer table (accessed with the "Show Info" button) you can adjust a value by holding the mouse over the value and rolling the wheel.

In the History screen, you can use the wheel to scroll through the History list.

Copy/Paste Support:

Right-click (under OS X you can also ctrl-click) on any slider to bring up a context menu allowing you to copy and paste its value. You can copy/paste between sliders, even if the sliders are in different instances of the plugin. You can also copy/paste between a slider and a text editor such as Notepad or TextEdit in order to see the slider's value to a much higher precision than the plugin displays.

Mouse and Meters:

You can zoom in and out on level meters and level histograms by holding down the Ctrl key under Windows or the Command key under OS X and clicking with the left mouse button to zoom in or the right mouse button to zoom out. Under OS X you can also Command-ctrl-click to zoom out.

You can reset the peaks or averaging of the spectrum by clicking on the spectrum.

You can reset a meter's peak indication by clicking on it. You can also reset a level meter's clipping indicator by clicking on the clipping indicator (the red "over" light at the top).

Shortcut Keys:

Front Panel
Ctrl + 1 through 6	Display each of the six mastering module screens with the Ctrl key in combination with the 1-6 keys.
Ctrl + Shift + 1 through 6	Displays options dialogs: 1: General Options 2: Spectrum Options 3: I/O Options 4: Meter Options 5: EQ/Reverb/Crossover Options 6: Auto-Normalize Options
Ctrl + P	Opens preset system dialog box
Ctrl + B	Toggles bypass for all Ozone processing.
Mastering Modules
Tab and Shift + Tab	Select the next or previous control. You can also select a control by clicking on it with the mouse. To select a slider without moving the slider, click on the slider label.
Home and End	Set the value of the selected control to its lowest or highest value, respectively.
Arrow keys	Turn the selected control up or down. Use with Shift key for larger increments.  You can select a control by clicking on it. To select a slider without moving the slider, click on the slider label.
Page Up and Page Down	Turn the selected control up or down in larger steps. Use with Shift key for larger increments.
Enter	Toggles the value of a checkbox or button control if selected, or enters numeric entry mode if a fader is selected.
Space Bar	Toggles the value of a checkbox if selected.
Direct Entry	Note that you can enter a numeric value directly for a selected control by pressing Enter or clicking on the numeric value label, entering a new number, and pressing the Enter key.
EQ
Alt + click	Apply a bandpass filter at the mouse cursor to "solo" the frequencies under the cursor
Ctrl + click (Windows) Command + click (OS X)	Selects multiple EQ bands to adjust them as one group
Shift + click	Constrain mouse movements (dragging an EQ band) in either the vertical or horizontal direction.
Double click	Double click on a band to reset it to its default position.
Left/Right arrow keys	Adjust the frequency of a selected band or bands. Use with Shift key for larger increments.
Up/Down arrow keys	Adjust the gain of a selected band or bands. Use with Shift key for larger increments.
Alt + up/down arrow keys	Changes the fiilter type (bell, lowpass, highpass, etc.) for the selected band.
Alt + left/right arrow keys	Select the next or previous EQ band.
Ctrl + left/right arrow keys	Adjust the Q of a selected band or bands. Use with Shift key for larger increments.
Input/Output Gain
Ctrl + - Ctrl + =	Increase the left and right input gain. Use with Shift key for larger increments
Ctrl + [ Ctrl + ]	Decrease the left and right input gain. Use with Shift key for larger increments
Ctrl + ; Ctrl + '	Increase the left and right output gain. Use with Shift key for larger increments
Ctrl + . Ctrl + /	Decrease the left and right output gain. Use with Shift key for larger increments
Ctrl + , Ctrl + \	Toggle locking the left and right input or output gains
Misc
Ctrl + Z	Undo the last change made to a control.
Ctrl + Y	Redo the last change made to a control.
Alt + 0 through 9 or Ctrl + Alt + 0 through 9	Sets the opacity/transparency of the Ozone UI. 0 is fully opaque (not transparent at all). After that, 1 through 9 set increasing levels of opacity.
Esc	Cancels dialog boxes.
F1	Displays help file.