The Imager tab lets you control Ozone's imager module options.
| Imager Options | |
|
Enable ticker correlation meter |
Turns on or off the ticker correlation meter. |
|
Tickertape correlation smoothing |
Adjusts the aggressiveness with which the tickertape correlation meter draws curves. |
| Phase Meter | |
|
Prevent antiphase |
Prevents mono compatibility problems when widening the stereo image. |
|
Show correlation meter history |
Turns on or off the history which the correlation meter "paints" as it updates. |
|
Enable vectorscope |
Turns on or off the vectorscope meter. |
|
Show vectorscope history |
Turns on or off the history which the vectorscope "paints" as it updates. |
|
Normalize vectorscope |
When enabled, the vectorscope automatically applies gain to its input in order to make it fill the entire display. When disabled, quieter signals will appear smaller on the vectorscope display. |
|
Enable correlation meter |
Turns on or off the correlation meter in the Stereo Imager module. The correlation meter shows the similarity between the left and right channels. |
|
Enable balance meter |
Turns on or off the balance meter in the Stereo Imager module. The balance meter shows the overall balance between the left and right channels. |
|
Vectorscope Detection Method |
When in Polar Level mode, this determines how the sample averages are detected. Selects between Peak, RMS, and Envelope. Envelope mode can be most useful when analyzing amplitude as it detects even levels across all frequencies. |
| Crossover | |
|
Number of bands |
Allows you to set the default number of bands available in the multiband modules. (up to 4) |
|
Crossover type |
Selects between a digital linear phase crossover, an analog crossover, and Ozone's Hybrid crossover. The digital crossover provides a more transparent sound, while the analog crossover option provides a natural analog character. The Hybrid crossover is a perfect reconstruction IIR analog crossover designed to reduce phase distortion and frequency distortion found in other analog crossovers while maintaining precise crossover points and the warm characteristics of analog crossovers. |
|
Crossover buffer size |
Sets the buffer size for the digital crossover. See Buffer Sizes for more info. |
|
Crossover Q |
Adjust the bandwidth or Q of the digital crossover filters. A higher Q results in tighter crossovers, while a lower Q provides a more gradual transition from one band to the next. |